The Importance of Colours
Irrespective of the size of the order you are placing, the colours you choose to use in your label design are critical! This is your Company’s Brand and one being represented by a product or packaging label in this case. Colour can make or break a design and the impact and influence it has on its audience.
The best printers will have invested in technologies to ensure your colours are accurate and consistent throughout the print run, and across all print runs.
The first place this starts is in the artwork studio with software that will automatically check the size, shape and file structure of your supplied artwork. As part of the workflow the studio will check PDFs and convert them to ISO standard and add your requested cutter guide with bespoke radius corners and ellipses. Our workflow process will also create an RGB softproof for you to check before signing off. At the same time, our workflow produces a Forgra39L standard print ready file, ready for the substrate your label is destined for.
Colour Management – Complicated but Important
In addition to artwork pre-press, it is vital that colours are reproduced accurately, in relation to the artwork, and in relation to previous batches. Did you know that colour experts say you can never match a colour? Strictly, this is true, but we can’t really notice it because the colour variances are too small to see with the human eye.
We use FOGRA39L to compare colours. This system was developed not from direct measurements of prints, but on the results of smoothing of multiple measurements to ensure a better reproduction target. In other words, minute adjustments of the CMYK output may be made to better represent the target colour depending on the press, the material you are printing on, or even the light under which the colour is viewed.
Colours look very different across different computer screens, under different lights, or even in rooms with different decorative colour schemes. We can match our colours to suit your environment.
Digital label printing uses ‘four colour process’ colours, by building colours from dots of Cyan, Magenta, Yellow and Key (Black), or CMYK. White is also used, most often to produce an under-layer when printing on clear materials, to enable the colours to stand out more. (More and more printing is done on clear materials recently, to allow the product to be seen inside the packaging.)
Flexographic printing, using more traditional printing plates and wet inks, has the advantage of being able to readily use inks made up to a precise pantone colour.
Help Us To Help You
Artwork is best designed in CMYK and in a vector graphics programme such as Adobe illustrator because this system can easily be used on either digital or flexo formats depending on run length.
Remember to tell us what the labels will be used for. We can then ensure the best finish, and help you decide on laminates, varnishes and materials or inks that can resist UV fading or chemical or moisture attack where necessary. Don’t forget a white underlay to your design if you are using a clear material unless you are sure you want a more transparent appearance to your colours.
Should you have any questions or require any further information then please do get in touch. Call us on 01543 431070. We are here to help.
This labelling news was spotted at Mercian Labels
Get the full story direct from source..